Products

Instructions:The product is divided into two parts(3pcs): A(upper)*2pcs + B(lower)*1pcs-Part A: The top is a build surface, and the back is magnetic (the interaction with the front of Part B...

Material: ABSDiameter format: 1.75 mmPrinting temperature: 230-270°CTolerance: ±0.02 mmPrinting speed: 50-100 mm/sPlatform temperature: 80-120 °CNet weight: 1kgGross weight: 1.3kgPackage dimensions: 209 * 209 * 73 mmLength: 395mTensile strength: 6-11kgfThe melt...

Model: PLADiameter Format: 1.75mmPrint Temp.: 200-230℃Tolerance: ±0.02mmPrint Speed： 50-100mm/sPlatform Temp： Depends on the platform: No need or 60-80℃N.W.: 0.25kgTensile Strength: 6-11kgfMelt Flow Rate: 7-9g/10min(200℃,2.16kg)Certificate: RoHS, Reach

Main Material  Resin+Photoinitiator Tensile Strength 30-50mpa Viscosity(25°C) 100-300cps Elongation at Break 7-10% Liquid Density 1.11-1.15g/m³ Flexural Modulus 900-1200MPa Solid Density 1.15-1.22g/m³ Bending Strength 40-60MPa Curing Wave Length 405nm Body Shrinkage...

Plant-Based Features： 1. Good molding, low odor, low shrinkage;2. Good tensile, bending and toughness properties.3. Environmentally friendly plant base Safe Package:Leak-proof bottle is fully wrapped with a plastic bubble bag...

Water Washable Resin Features： 1.【Water Washable, no IPA Needed】Instead of using IPA to clean up the prints, you can use tap water to wash the prints, save your money on IPA. SUNLU...

ABS-like Features： 1. Good molding, low odor, low shrinkage;2. All aspects of tensile, bending and toughness performance is good, can punch and tap.3. The molding performance is similar to ABS,...

Material: TPU Flexible Filament Diameter format: 1.75 mmPrinting temperature: 200-230°CTolerance: ±0.02 mmPrinting speed: 20-40 mm/sPlatform temperature: No needNet weight: 0.5kgGross weight: 0.8kgPackage dimensions: 209 * 209 * 73 mmLength: 165mTensile strength:...

A: Odorless, non-toxic, environmentally friendly, and recyclable, SUNLU PETG is the most suitable 3D filament for families with children, high purity with low shrinkage and superb layer bonding, meeting your demands...

1. Environmental protection, non-toxic, biodegradable; 2. Soft and warm colors 3. Low shrinkage rate; 4. High strength and rigidity; 5. Very good toughness, not easy to break 6. The printing...

  Model : Silk Diameter Format： 1.75mmPrint Temp.： 190-220℃Tolerance： ±0.02mmPrint Speed： 50-100mm/sPlatform Temp： Depends on the platform: No need or 60-80℃N.W.： 1kgG.W.： 1.3kgPacking Size： 209*209*73mmLength： 330mTensile Strength： 6-11kgfMelt Flow Rate：...

Model ： PLA Diameter Format： 1.75mmPrint Temp.： 190-230℃Tolerance： ±0.02mmPrint Speed： 50-100mm/sPlatform Temp： Depends on the platform: No need or 60-80℃N.W.： 1kgG.W.： 1.3kgPacking Size： 209*209*73mmLength： 330mTensile Strength： 6-11kgfMelt Flow Rate： 7-9g/10min(190℃,2.16kg)Colors：...