[Pre-order] SUNLU FilaDryer SP2, 2-in-1 Filament Dryer Combine with Storage Box, Up to 70℃(158°F) Drying and Seamless Storage, Compatible with spool size 1kg×2 or 2kg×1 or 3kg×1
Regular price
€62,79 EUR
Regular price
-13%
€71,76 EUR
Sale price
€62,79 EUR
⏰Estimated Shipping Time:
All orders will be fulfilled within August 31th, 2025
📢Before You Order:
Please note this product is available in 2 sets
1️⃣ FilaDryer SP2 Set | 2️⃣ Storage Box Set
*Please confirm your selected content and price before checkout!
■ ■ ■ □
Free shipping to most of USA, EU, UK, CA and AU regions
Guaranteed Secure Checkout
Couldn't load pickup availability
💭Invite a friend to experience the incredible quality of SUNLU products! Share the joy of innovation and creativity with those who matter to you most.
[2-in-1 Filament Dryer and Storage Box Combination] Is there any way to handle drying and storage filament at the same time? SUNLU FilaDryer SP2, with efficient heating base and storage box, designed as two separated parts. Multiple storage boxes can be used as storage boxes can be freely stacked (maximum stacking of 3 is recommended) to enhance space utilization.
[Strong Sealing] The top cover and sealing bottom cover are designed with silicone, which has a good sealing effect. Whether used as a filament dryer or as a storage box, it has very good thermal insulation. When used as a storage box, it has been measured that under an average ambient humidity of about 50%, an average of about 25% humidity can be maintained inside.
[Large Internal Space and Spool Compatibility] Internal compatibility with 0.25~3kg spools, even paper spool can also be realized by fixing the spool roller. The storage box compartment can hold two rolls of 1kg filaments, one roll of 2kg (2 rolls of 2kg filaments for SUNLU), and 3kg filaments, and supports a maximum spool diameter of 250mm and a maximum spool width of 153mm. it is compatible with both 1.75mm and 2.85mm diameter filament. Even damaged spools can be fixed with the spool roller.
[Humanized Design] The storage box part adopts the detail design of carrying handle + bottom depression, which is convenient for users to move. In addition, the storage box is equipped with an independent hygrometer for real-time observation of internal humidity changes, and 3 cable outlet holes on each side of the box to meet the printing needs of different sizes of filaments.
[Strong Safety, Stress-free Use] The triple safety design of 200W PTC + fan heating, secondary temperature protection switch and software intelligent temperature control ensures the heating process is foolproof.
Product Name: SUNLU Filament Dryer SP2 / Storage Box Set
Product Dimentsions: 278mm×208mm×396mm(LWH)
Internal Dimentsions: 265mm×193mm×274mm(LWH)
Package Size: 337mm×263mm×380mm(LWH)
N.W.: FilaDryer SP2 Set: 3.6KG, Storage Box Set: 5.0KG
G.W.: FilaDryer SP2 Set: 4.1KG, Storage Box Set: 5.5KG
Operating Environment: Temperature: 10°C-35°C, Relative Humidity: ≤95%
Compatible Filament Diameters: Φ1.75mm/Φ2.85mm
Maximum Spool Size: Φ250mm×153mm(1kg×2 or 2kg×1 or 3kg×1)
Work Temperature Range: 35°C-70°C (PLA, PLA+, PETG, ABS, TPU, PVA, PVB, ASA, PA/PC etc.)
Humidity Display Range: Refer to the Hygrometer:10%-90%
Time Setting Range: 0-99h
Power Input Specifications(Ensure the voltage matches yourlocal supply before use): AC 110V 60Hz 0r AC 220V 50Hz
Maximum Operating Current: 2.2A@230V, 4.2A@120V
Maximum Working Power: 250w
Stand by Power: ≤1W
Package Contents:FilaDryer SP2 Set: Storage Box *1, Heating Base *1, Hygrometer *1, Desiccant *1, Desiccant Box *1, Power Cable *1, Spool Roller *1, Air lock *2, PTFE Tube 8cm *2, PTFE Tube 1m *2, User Manual *1
Storage Box Set: Storage Box *1, PLA+2.0 Black *2, Hygrometer *1, Desiccant *1, Desiccant Box *1, Spool Roller *1, Air lock *2, PTFE Tube 8cm *2, PTFE Tube 1m *2, User Manual *1
P.S.: The SP2 can also be used as a storage box independently. They can be freely stacked (it is recommended to stack up to 3) to improve space utilization.
SUNLU FilaDryer SP2, 2-in-1 Filament Dryer Combine with Storage Box, Up to 70℃(158°F) Drying and Seamless Storage, Compatible with spool size 1kg×2 or 2kg×1 or 3kg×1
-
It features a carrying handle and bottom depression for easy moving. The storage box includes an independent hygrometer for real-time humidity monitoring and 3 cable outlet holes on each side to accommodate printing needs for various filament sizes.
-
SP2 FilaDryer gives full consideration to the safety of users. The triple safety design of 200W PTC + fan heating, secondary temperature protection switch and software intelligent temperature control ensures the heating process is foolproof.
-
SP2 has superb adaptability to most universal filaments on the market. Its working temperature range: 35°C-70°C. It can be compatible with 99% of general filaments and some functional filaments like: PLA, PLA+, PETG, ABS, TPU, PVA, PVB, ASA, PA/PC etc.
FAQs of Filament Dryer SP2
Looking for more infomations about SP2
1. The maximum heating temperature of SUNLU Filament Dryer SP2 is up to 70 ℃, please carefully observe the current set parameters (such as filament type, heating temperature) is consistent with the actual need to dry the filament, to avoid too high a temperature leading to deformation of the filament (filament drying temperature, recommended product manuals or this product page of the filament spool data)For example, if the machine is set to operate at ≥70°C, the temperature resistance of the spool of the filament you are using should be ≥70°C to avoid deformation of the spool.
2. When the ambient temperature is below 10℃, slow heating or the actual temperature inside the chamber being slightly lower than the displayed temperature is normal.
3. The desiccant in this product is orange at room temperature and turns dark green after absorbing moisture. It can be restored to orange by drying at 70℃ and reused.
SP2 supports the separation of the heating base and the storage box. To keep the filaments continuously dry (to prevent secondary moisture), after the drying is completed, the cavity of the storage box can be removed, and a sealing foot pad should be installed at the bottom. At the same time, the silicone plugs of the filaments' outlet holes should be tightly inserted
1. Do not place the SUNLU Filament Dryer SP2 within the reach of children. Electrical safety should be observed during operation. Do not use this product near water, such as bathrooms, bathtubs washbasins and other places where water is easily accessible.
2. Please use the original power cord or a power cord that meets the safety certification requirements.
3. When not using this product, please turn off the power to avoid sudden fire.
4. During the working process of this product, please do not put the product on the objects which are sensitive to temperature.
5. Do not touch the heater or fan inside the box during the working process of this product to avoid burns. When drying filaments, the top cover of the drying box should be covered to avoid heat dissipation.
6. Please do not block the internal air inlet and outlet to avoid abnormal heat accumulation.
7. If the product malfunctions, please turn off the power and disconnect the power cord from the power outlet, then contact the after-sales support team (support@sunlu.com).
Even though the product is protected in many places, to avoid burns, do not touch the enclosure/handle the oven while it is in operation (or take appropriate thermal protection measures, e.g., wear insulated gloves).
In order to ensure the drying effect, please do not open the upper cover of the drying box during the operation. During the drying process, it is recommended to open the silicone plug of the filament outlet hole (to let the internal moisture fully discharged); after the drying process, it is recommended to plug the silicone plug tightly (to avoid the entry of external moisture).
We provide 14 DAYS REFUND & RETURND
If there are any order shipping or other issues, please email after-sales service at sales02@sunlu.com
If there are any product quality issues, please email tech-service at support@sunlu.com
Click here for more information(Return Policy)
For non-pre-sale orders, the delivery time is generally 1-7 working days, and you can track your order on the website.
Click here for more information(Shipping Policy).
You selected the wrong country/region, please go back to the product page, click the correct country or region where you are, and then select the product to checkout.
We can only ship from the warehouse in the corresponding country/region and cannot ship across country or regions.
PLA is a food-safe material, but the filament will be added with toner during the production process, and it may also be contaminated by the printing nozzle during the printing process, so we do not recommend you to use PLA to print tableware
Subscribe to our newsletter, you can get a 10% discount for your first order, and at the same time, you can receive the latest promotion information and new product release information of Sunlu
