PP
SUNLU PP is a lightweight, low-density material with excellent chemical resistance and fatigue resistance, ideal to create fold-resistant and impact-resistant functional parts.

1. Low density and lightweight, prints ~27% lighter than PLA for the same model
2. Food contact safe material
3. Excellent chemical corrosion resistance
4. High toughness, resistant to breakage, with superior durability and fatigue resistance
A PP build plate or PP glue must be used to prevent warping and detachment.
Core performance parameters
| Tensile Strength | 22.7MPa |
| Bending Strength | 24MPa |
| HDT | 61℃ |
| Density | 0.9g/cm³ |
| Flame retardant rating | UL94 HB |
Printing Parameters
| Nozzle Print Temperature | 210-230℃ |
| Print Platform Temperature | 50-60℃ |
| Printing Speed | 50-150mm/s |
Print configuration
| Build plate material | PP build plate |
| Bed preparation | Apply PP glue |
| Cooling fan | On |
| Support material | PVA |
| Drying temperature | 50℃ |
Easy PA
SUNLU Easy PA improves the printability of nylon by reducing warping and moisture sensitivity while retaining high strength.

1. Easy to print, resistant to cracking and warping
2. Good tensile strength, ductility, and flowability
3. High toughness, producing strong and impact-resistant prints
1. Optimized formulation reduces the difficulty of printing PA; highly hygroscopic.
2. Must be thoroughly dried for 4–6 hours before printing (temperature: 80–110 °C).
3. Suitable for structural and functional parts; not resistant to strong acids or strong alkalis.
4. Keep the workspace clean to prevent dust accumulation.
Core performance parameters
| Tensile Strength | 61±6 MPa |
| Bending Strength | 91±5 MPa |
| HDT | 119±3℃ |
| Density | 1.10 g/cm³ |
Printing Parameters
| Nozzle Print Temperature | 250-280℃ |
| Print Platform Temperature | 30-50℃ |
| Printing Speed | 70-160 mm/s |
| Retraction Distance | 0.8-1.2mm |
| Retraction Speed | 30-40mm/s |
Print configuration
| Build plate material | PEI textured plate |
| Bed preparation | GLUE |
| Cooling fan | Off |
| Ambient temperature | Room temperature |
| Drying temperature | 80-110℃ |
PA6-CF
SUNLU PA6-CF is a high-strength, high-rigidity material with excellent heat resistance and dimensional stability, suitable for demanding engineering parts.

1. High stiffness and strength, suitable for printing parts requiring high mechanical performance
2. High toughness, impact- and shock-resistant
3. Heat deflection temperature of 209 °C, maintaining stability in high-temperature environments
4. Compatible with 99% of FDM printers on the market
1. Carbon fiber reinforcement provides superior strength and rigidity compared to standard PA, with lower weight.
2. Highly hygroscopic; dry for 8–12 hours before printing.
3. Nozzle wear is accelerated; a hardened nozzle is recommended.
4. Suitable for high‑end applications such as aerospace and automotive components.
Core performance parameters
| Tensile Strength | 112±10 MPa |
| Bending Strength | 192±20 MPa |
| HDT | 203±3℃ |
| Density | 1.12 g/cm³ |
Printing Parameters
| Nozzle Print Temperature | 270-290℃ |
| Print Platform Temperature | 50-70℃ |
| Retraction Distance | 0.8-1.2mm |
| Retraction Speed | 30mm/s |
| Printing Speed | 50-100mm/s |
Print configuration
| Build plate material | PEI textured plate |
| Bed preparation | GLUE/ LAC spray |
| Cooling fan | On |
| Ambient temperature | Room temperature |
| Drying temperature | 80-110℃ |
PA6-GF
SUNLU PA6-GF is a glass fiber reinforced nylon with high strength and wear resistance, maintaining stability under harsh operating conditions.

1. Contains 25% glass fiber, ensuring dimensional stability
2. Heat deflection temperature of 214 °C, maintaining stability in extreme high-temperature environments
3. Ultra-high strength, impact- and drop-resistant
4. 1.75 ± 0.02 mm diameter tolerance, high printer compatibility
5. Compatible with 99% of FDM printers on the market
1. Glass fiber reinforcement significantly improves strength and heat resistance, making it suitable for high‑end structural parts.
2. Extremely hygroscopic; keep dry during the printing process.
3. Dry for 4–6 hours (temperature: 100–110 °C) to prevent moisture‑induced interlayer cracking.
4. Excellent resistance to weak alkalis and deionized water.
Core performance parameters
| Tensile Strength | 89±8 MPa |
| Bending Strength | 176±8 MPa |
| HDT | 205.2±3℃ |
| Density | 1.269 g/cm³ |
Printing Parameters
| Nozzle Print Temperature | 270-290℃ |
| Print Platform Temperature | 60-70℃ |
| Retraction Distance | 0.8-1.2mm |
| Retraction Speed | 30-40mm/s |
| Printing Speed | < 130 mm/s |
Print configuration
| Build plate material | PEI textured plate |
| Bed preparation | GLUE/ LAC spray |
| Cooling fan | On |
| Ambient temperature | Room temperature |
| Drying temperature | 80-110℃ |
PA12-CF
SUNLU PA12-CF offers lower moisture absorption and superior dimensional stability compared to PA6, making it suitable for high-precision engineering components.

1. Good impact resistance, prints are drop- and impact-resistant
2. Heat deflection temperature of 175 °C, suitable for most engineering applications
3. 1.75 ± 0.02 mm diameter tolerance, high printer compatibility
4. Compatible with 99% of FDM printers on the market
1. Carbon fiber reinforcement provides superior strength and rigidity compared to standard PA, with lower weight.
2. Highly hygroscopic; dry for 4–6 hours before printing.
3. Nozzle wear is accelerated; a hardened nozzle is recommended.
4. Suitable for high‑end applications such as aerospace and automotive components.
Core performance parameters
| Tensile Strength | 105±10 MPa |
| Bending Strength | 180±15 MPa |
| HDT | 195±5℃ |
| Density | 1.08 g/cm³ |
Printing Parameters
| Nozzle Print Temperature | 260-280℃ |
| Print Platform Temperature | 50-70℃ |
| Printing Speed | 60-150 mm/s |
| Retraction Distance | 0.8-1.2mm |
| Retraction Speed | 30-40mm/s |
Print configuration
| Build plate material | PEI textured plate |
| Bed preparation | GLUE/ LAC spray |
| Cooling fan | On |
| Ambient temperature | Room temperature |
| Drying temperature | 80-110℃ |
PC
SUNLU PC is a high-toughness, high-strength, heat-resistant engineering plastic with excellent impact resistance.

1. Good toughness, prints are drop- and impact-resistant
2. High impact strength and toughness, suitable for load-bearing parts
3. Low shrinkage, ensuring high dimensional accuracy
4. 1.75 ± 0.02 mm diameter tolerance, high printer compatibility
5. Compatible with 99% of FDM printers on the market
1. High toughness and heat resistance; suitable for 3C electronics and functional parts.
2. Enclosed printing is recommended to reduce warping.
3. Moderately hygroscopic; dry for 2–3 hours before printing.
4. Not resistant to strong acids, strong alkalis, or acetone; avoid contact with organic solvents.
Core performance parameters
| Tensile Strength | 50±3 MPa |
| Elongation at Break | 25±3% |
| HDT | 101±2℃ |
| Density | 1.15 g/cm³ |
Printing Parameters
| Nozzle Print Temperature | 260-280℃ |
| Print Platform Temperature | 100-110℃ |
| Printing Speed | ≤150 mm/s |
| Retraction Distance | 0.8-1.2mm |
| Retraction Speed | 30-40mm/s |
Print configuration
| Build plate material | Regular |
| Bed preparation | LAC spray |
| Cooling fan | On |
| Ambient temperature | Room temperature |
| Drying temperature | 70-80℃ |
PC-ABS
SUNLU PC-ABS combines the strength of PC with the processing advantages of ABS, offering balanced toughness, heat resistance, and print stability.

1. Heat deflection temperature 102 °C, offering good thermal stability
2. High toughness, suitable for printing load-bearing and impact-resistant parts
3. 1.75 ± 0.02 mm diameter tolerance, high printer compatibility
4. Compatible with 99% of FDM printers on the market
1. Combines the heat resistance of PC with the processability of ABS; suitable for automotive trim and consumer electronics (3C).
2. Enclosed printing with a chamber temperature of 90–100 °C is recommended to reduce warping.
3. Dry for 2–3 hours to prevent moisture from affecting coating adhesion.
4. Poor chemical resistance; avoid contact with acids, alkalis, and organic solvents.
Core performance parameters
| Tensile Strength | 38±3 MPa |
| Bending Strength | 70±3 MPa |
| HDT | 102±2℃ |
| Density | 1.081 g/cm³ |
Printing Parameters
| Nozzle Print Temperature | 260-280℃ |
| Print Platform Temperature | 100-110℃ |
| Printing Speed | ≤230 mm/s |
| Retraction Distance | 0.8-1.2mm |
| Retraction Speed | 30-40mm/s |
Print configuration
| Build plate material | Regular |
| Bed preparation | LAC spray |
| Cooling fan | Off |
| Ambient temperature | 90-100℃ (Enclosed chamber) |
| Drying temperature | 70-80℃ |
PEEK
SUNLU PEEK is a premium engineering material with exceptional heat resistance, mechanical strength, and chemical resistance, designed for high-end industrial and extreme application environments.

1. Heat deflection temperature 147 °C, offering excellent thermal stability
2. Excellent chemical resistance
3. V0-level flame retardant
4. Exceptional toughness, prints are impact- and drop-resistant
5. Good self-lubricating properties, suitable for bearings, gears, and similar parts
6. Excellent fatigue resistance, able to withstand repeated cyclic loads without performance loss
1. A high‑end specialty engineering material suitable for applications such as aerospace and medical devices.
2. For long‑term printing, replace with a dedicated high‑temperature resistant nozzle.
3. Dry for 4–6 hours at 110–140 °C with strict temperature control.
4. Enhanced ventilation in the processing area is required to avoid irritation from fumes generated by thermal decomposition.
Core performance parameters
| Tensile Strength | 77 MPa |
| Bending Strength | 122 MPa |
| HDT | 147℃ |
| Density | 1.1965 g/cm³ |
Printing Parameters
| Nozzle Print Temperature | 390-420℃ |
| Print Platform Temperature | 110-120℃ |
| Printing Speed | 30-60 mm/s |
| Retraction Distance | 1-1.5mm |
| Retraction Speed | 30-40mm/s |
Print configuration
| Build plate material | Regular |
| Bed preparation | LAC spray |
| Cooling fan | Off |
| Ambient temperature | 90-100℃ (Enclosed chamber) |
| Drying temperature | 70-80℃ |

