Material

Model： WOODDiameter Format： 1.75mmThere are two WOOD filament recommended print temperature, Please check the package label before start printing:Print Temp：      190-220℃Low print Temp: 170-190℃Tolerance： ±0.02mmPrint Speed： 50-100mm/sPlatform Temp：...

Material: TPU Flexible Filament Diameter format: 1.75 mmPrinting temperature: 200-230°CTolerance: ±0.02 mmPrinting speed: 20-40 mm/sPlatform temperature: No needNet weight: 0.5kgGross weight: 0.8kgPackage dimensions: 209 * 209 * 73 mmLength: 165mTensile strength:...

  Model : Silk Diameter Format： 1.75mmPrint Temp.： 190-220℃Tolerance： ±0.02mmPrint Speed： 50-100mm/sPlatform Temp： Depends on the platform: No need or 60-80℃N.W.： 1kgG.W.： 1.3kgPacking Size： 209*209*73mmLength： 330mTensile Strength： 6-11kgfMelt Flow Rate： 7-9g/10min(190℃,2.16kg)Colors：...

 Main Material  Resin+Photoinitiator Tensile Strength 30-50mpa Viscosity(25°C) 100-300cps Elongation at Break 7-10% Liquid Density 1.11-1.15g/m³ Flexural Modulus 900-1200MPa Solid Density 1.15-1.22g/m³ Bending Strength 40-60MPa Curing Wave Length 405nm Body...

PA-like Features： 1. Good molding, low odor, low shrinkage;2. All aspects of tensile, bending and toughness performance is better, can punch and tap.3. The molding performance is similar to THAT...

ABS-like Features： 1. Good molding, low odor, low shrinkage;2. All aspects of tensile, bending and toughness performance is good, can punch and tap.3. The molding performance is similar to ABS,...

Plant-Based Features： 1. Good molding, low odor, low shrinkage;2. Good tensile, bending and toughness properties.3. Environmentally friendly plant base Safe Package:Leak-proof bottle is fully wrapped with a plastic bubble bag...

Main Material  Resin+Photoinitiator Tensile Strength 30-50mpa Viscosity(25°C) 100-300cps Elongation at Break 7-10% Liquid Density 1.11-1.15g/m³ Flexural Modulus 900-1200MPa Solid Density 1.15-1.22g/m³ Bending Strength 40-60MPa Curing Wave Length 405nm Body Shrinkage...

Water Washable Resin Features： 1.【Water Washable, no IPA Needed】Instead of using IPA to clean up the prints, you can use tap water to wash the prints, save your money on IPA. SUNLU...

A: Odorless, non-toxic, environmentally friendly, and recyclable, SUNLU PETG is the most suitable 3D filament for families with children, high purity with low shrinkage and superb layer bonding, meeting your demands...

A: Odorless, non-toxic, environmentally friendly, and recyclable, SUNLU PETG is the most suitable 3D filament for families with children, high purity with low shrinkage and superb layer bonding, meeting your demands...

Main Material  Resin+Photoinitiator Tensile Strength 30-50mpa Viscosity(25°C) 100-300cps Elongation at Break 7-10% Liquid Density 1.11-1.15g/m³ Flexural Modulus 900-1200MPa Solid Density 1.15-1.22g/m³ Bending Strength 40-60MPa Curing Wave Length 405nm Body Shrinkage...