Main Material Resin+Photoinitiator Tensile Strength 30-50mpa Viscosity(25°C) 100-300cps Elongation at Break 7-10% Liquid Density 1.11-1.15g/m³ Flexural Modulus 900-1200MPa Solid Density 1.15-1.22g/m³ Bending Strength 40-60MPa Curing Wave Length 405nm Body Shrinkage...
ABS-like Features: 1. Good molding, low odor, low shrinkage;2. All aspects of tensile, bending and toughness performance is good, can punch and tap.3. The molding performance is similar to ABS,...
Main Material Resin+Photoinitiator Tensile Strength 30-50mpa Viscosity(25°C) 100-300cps Elongation at Break 7-10% Liquid Density 1.11-1.15g/m³ Flexural Modulus 900-1200MPa Solid Density 1.15-1.22g/m³ Bending Strength 40-60MPa Curing Wave Length 405nm Body Shrinkage...
Main Material Resin+Photoinitiator Tensile Strength 30-50mpa Viscosity(25°C) 100-300cps Elongation at Break 7-10% Liquid Density 1.11-1.15g/m³ Flexural Modulus 900-1200MPa Solid Density 1.15-1.22g/m³ Bending Strength 40-60MPa Curing Wave Length 405nm Body Shrinkage...
PA-like Features: 1. Good molding, low odor, low shrinkage;2. All aspects of tensile, bending and toughness performance is better, can punch and tap.3. The molding performance is similar to THAT...
1.【Water Washable, no IPA Needed】Instead of using IPA to clean up the prints, you can use tap water to wash the prints, save your money on IPA. 2.【Fast Curing and...
ABS-like Features: 1. Good molding, low odor, low shrinkage;2. All aspects of tensile, bending and toughness performance is good, can punch and tap.3. The molding performance is similar to ABS,...
Water Washable Resin Features: 1.【Water Washable, no IPA Needed】Instead of using IPA to clean up the prints, you can use tap water to wash the prints, save your money on IPA. SUNLU...
Main Material Resin+Photoinitiator Tensile Strength 30-50mpa Viscosity(25°C) 100-300cps Elongation at Break 7-10% Liquid Density 1.11-1.15g/m³ Flexural Modulus 900-1200MPa Solid Density 1.15-1.22g/m³ Bending Strength 40-60MPa Curing Wave Length 405nm Body Shrinkage...
Plant-Based Features: 1. Good molding, low odor, low shrinkage;2. Good tensile, bending and toughness properties.3. Environmentally friendly plant base Safe Package:Leak-proof bottle is fully wrapped with a plastic bubble bag...
Main Material Resin+Photoinitiator Tensile Strength 30-50mpa Viscosity(25°C) 100-300cps Elongation at Break 7-10% Liquid Density 1.11-1.15g/m³ Flexural Modulus 900-1200MPa Solid Density 1.15-1.22g/m³ Bending Strength 40-60MPa Curing Wave Length 405nm Body Shrinkage...
Main Material Resin+Photoinitiator Tensile Strength 30-50mpa Viscosity(25°C) 100-300cps Elongation at Break 7-10% Liquid Density 1.11-1.15g/m³ Flexural Modulus 900-1200MPa Solid Density 1.15-1.22g/m³ Bending Strength 40-60MPa Curing Wave Length 405nm Body Shrinkage...