【Dimensional Accuracy & Consistency】Glow in The Dark PLA filaments to be strict tolerances; Diameter 1.75mm, dimensional accuracy + / - 0.03 mm without any exaggeration; 1 kg spool (2.2lbs)
【Clog-Free, Bubble-Free & Easy-to-use】Complete drying for 24 hours before packaging and vacuum sealed with desiccants in nylon re bag.
【Wide Compatibility】Works and harmonizes perfectly with all common 1.75mm FDM 3D printers, thanks to the high quality standards in terms of manufacturing accuracy and the small tolerance in diameter of +/- 0.03mm.
【Worry-free After-sales Service】 We provide professional after-sales service for any SUNLU 3D filament you have purchased, which is more considerate and assured.
Material: Grow in Dark PLA(PLA Based)
Wire diameter: 1.75/3.0MM Tolerance: ±0.02MM
Printing temperature: 200-210℃
Substrate temperature: no heating needs to be coated with glue
Heating 50-65℃ can not be coated with glue
Tensile force KGF: 11-16 (enterprise standard 23℃ wire diameter 1.75 mm)
Melt index: 7-9g/10min (190℃,2.16Kg) (refer to GB/T 3682.1-2018)
Elongation at break: 4% (enterprise standard 23℃, wire diameter 1.75 mm)
Melting point: 165-180℃
Heat distortion temperature: 55℃
Density g/cm³: 1.24
Water Absorption: 0.5%
Suggested printing speed: 50-100MM/s
Bubble: 100% zero bubble
Net weight: 1 KG/roll
Gross weight: 1.3 KG / roll
Length: 1.75MM(1KG)=330M, 3.0MM(1KG)=330M, 3.0MM(1KG)=330M, 3.0MM(1KG)
DownloadSUNLU PLA Grow-in-Dark MSDS
SUNLU PLA Grow-in-Dark Data Sheet