Engineering Filaments

PP

SUNLU PP is a lightweight, low-density material with excellent chemical resistance and fatigue resistance, ideal to create fold-resistant and impact-resistant functional parts.

PP.jpg

1. Low density and lightweight, prints ~27% lighter than PLA for the same model

2. Food contact safe material

3. Excellent chemical corrosion resistance

4. High toughness, resistant to breakage, with superior durability and fatigue resistance

A PP build plate or PP glue must be used to prevent warping and detachment.


Core performance parameters

Tensile Strength22.7MPa
Bending Strength24MPa
HDT61℃
Density0.9g/cm³
Flame retardant ratingUL94 HB


Printing Parameters

Nozzle Print Temperature210-230℃
Print Platform Temperature50-60℃
Printing Speed50-150mm/s


Print configuration

Build plate materialPP build plate
Bed preparationApply PP glue
Cooling fanOn
Support material PVA
Drying temperature 50℃

PP 2.0

SUNLU PP 2.0 is a lightweight, low-density material optimized from PP, offering faster printing speeds and a more stable printing process. It is suitable for producing impact-resistant and chemically resistant parts.PP2.0纯白.jpg

1. Supports printing speeds of up to 170 mm/s for greater printing efficiency

2. Optimized formulation ensures more stable printing performance with reduced warping

3. Low-density, lightweight formulation makes printed models approximately 27% lighter than those made with standard PLA

4. Made with materials suitable for food contact

5. Offers excellent chemical resistance

6. High toughness resists breakage and provides excellent durability and fatigue resistance

1. PP has low surface energy, which can make first-layer adhesion challenging. Use PP-specific glue or a PP-compatible 3D printing adhesive to improve bed adhesion and reduce warping or detachment

2. Reduce the first-layer printing speed to ensure proper filament adhesion to the build plate and improve print success rates

3. Maintain a stable printing environment and avoid direct drafts during printing, especially for large or flat models, to minimize shrinkage and warping

4. Add a brim for models with small contact areas, sharp corners, or a higher risk of warping to improve first-layer adhesion

5. llow the build plate to cool completely before removing the printed model to avoid damaging the part or build surface


Core performance parameters

Tensile Strength15±3
Bending Strength18±3
HDT65±10℃
Density1.01g/cm³


Printing Parameters

Nozzle Print Temperature 240-260℃: 30-170mm/s
Print Platform Temperature40℃
Retraction Distance0.8-1.2mm
Retraction Speed30-40mm/s


Print configuration

Build plate materialPP build plate
Bed preparationApply PP glue
Cooling fanOn
Support material PVA
Drying temperature 50℃

Easy PA

SUNLU Easy PA improves the printability of nylon by reducing warping and moisture sensitivity while retaining high strength.

Easy PA.jpg

1. Easy to print, resistant to cracking and warping

2. Good tensile strength, ductility, and flowability

3. High toughness, producing strong and impact-resistant prints

1. Optimized formulation reduces the difficulty of printing PA; highly hygroscopic.

2. Must be thoroughly dried for 4–6 hours before printing (temperature: 80–110 °C).

3. Suitable for structural and functional parts; not resistant to strong acids or strong alkalis.

4. Keep the workspace clean to prevent dust accumulation.


Core performance parameters

Tensile Strength61±6 MPa
Bending Strength 91±5 MPa
HDT119±3℃
Density1.10 g/cm³


Printing Parameters

Nozzle Print Temperature250-280℃
Print Platform Temperature 30-50℃
Printing Speed70-160 mm/s
Retraction Distance0.8-1.2mm
Retraction Speed30-40mm/s


Print configuration

Build plate materialPEI textured plate
Bed preparationGLUE
Cooling fanOff
Ambient temperature Room temperature
Drying temperature80-110℃

PA6-CF

SUNLU PA6-CF is a high-strength, high-rigidity material with excellent heat resistance and dimensional stability, suitable for demanding engineering parts.

PA6-CF.jpg

1. High stiffness and strength, suitable for printing parts requiring high mechanical performance

2. High toughness, impact- and shock-resistant

3. Heat deflection temperature of 209 °C, maintaining stability in high-temperature environments

4. Compatible with 99% of FDM printers on the market

1. Carbon fiber reinforcement provides superior strength and rigidity compared to standard PA, with lower weight.

2. Highly hygroscopic; dry for 8–12 hours before printing.

3. Nozzle wear is accelerated; a hardened nozzle is recommended.

4. Suitable for high‑end applications such as aerospace and automotive components.


Core performance parameters

Tensile Strength112±10 MPa
Bending Strength192±20 MPa
HDT203±3℃
Density1.12 g/cm³


Printing Parameters

Nozzle Print Temperature270-290℃
Print Platform Temperature 50-70℃
Retraction Distance0.8-1.2mm
Retraction Speed30mm/s
Printing Speed50-100mm/s


Print configuration

Build plate materialPEI textured plate
Bed preparationGLUE/ LAC spray
Cooling fanOn
Ambient temperature Room temperature
Drying temperature80-110℃

PA6-GF

SUNLU PA6-GF is a glass fiber reinforced nylon with high strength and wear resistance, maintaining stability under harsh operating conditions.

黑色-尼龙6-玻纤维 PA6-GF (Coming Soon).jpg

1. Contains 25% glass fiber, ensuring dimensional stability

2. Heat deflection temperature of 214 °C, maintaining stability in extreme high-temperature environments

3. Ultra-high strength, impact- and drop-resistant

4. 1.75 ± 0.02 mm diameter tolerance, high printer compatibility

5. Compatible with 99% of FDM printers on the market

1. Glass fiber reinforcement significantly improves strength and heat resistance, making it suitable for high‑end structural parts.

2. Extremely hygroscopic; keep dry during the printing process.

3. Dry for 4–6 hours (temperature: 100–110 °C) to prevent moisture‑induced interlayer cracking.

4. Excellent resistance to weak alkalis and deionized water.


Core performance parameters

Tensile Strength89±8 MPa
Bending Strength176±8 MPa
HDT205.2±3℃
Density1.269 g/cm³


Printing Parameters

Nozzle Print Temperature270-290℃
Print Platform Temperature60-70℃
Retraction Distance 0.8-1.2mm
Retraction Speed30-40mm/s
Printing Speed< 130 mm/s


Print configuration

Build plate materialPEI textured plate
Bed preparationGLUE/ LAC spray
Cooling fanOn
Ambient temperatureRoom temperature
Drying temperature80-110℃

PA12-CF

SUNLU PA12-CF offers lower moisture absorption and superior dimensional stability compared to PA6, making it suitable for high-precision engineering components.

PA12-CF.jpg

1. Good impact resistance, prints are drop- and impact-resistant

2. Heat deflection temperature of 175 °C, suitable for most engineering applications

3. 1.75 ± 0.02 mm diameter tolerance, high printer compatibility

4. Compatible with 99% of FDM printers on the market

1. Carbon fiber reinforcement provides superior strength and rigidity compared to standard PA, with lower weight.

2. Highly hygroscopic; dry for 4–6 hours before printing.

3. Nozzle wear is accelerated; a hardened nozzle is recommended.

4. Suitable for high‑end applications such as aerospace and automotive components.


Core performance parameters

Tensile Strength105±10 MPa
Bending Strength180±15 MPa
HDT195±5℃
Density1.08 g/cm³


Printing Parameters

Nozzle Print Temperature260-280℃
Print Platform Temperature50-70℃
Printing Speed60-150 mm/s
Retraction Distance0.8-1.2mm
Retraction Speed30-40mm/s


Print configuration

Build plate materialPEI textured plate
Bed preparationGLUE/ LAC spray
Cooling fanOn
Ambient temperatureRoom temperature
Drying temperature80-110℃

PC

SUNLU PC is a high-toughness, high-strength, heat-resistant engineering plastic with excellent impact resistance.

PC.jpg

1. Good toughness, prints are drop- and impact-resistant

2. High impact strength and toughness, suitable for load-bearing parts

3. Low shrinkage, ensuring high dimensional accuracy

4. 1.75 ± 0.02 mm diameter tolerance, high printer compatibility

5. Compatible with 99% of FDM printers on the market

1. High toughness and heat resistance; suitable for 3C electronics and functional parts.

2. Enclosed printing is recommended to reduce warping.

3. Moderately hygroscopic; dry for 2–3 hours before printing.

4. Not resistant to strong acids, strong alkalis, or acetone; avoid contact with organic solvents.


Core performance parameters

Tensile Strength50±3 MPa
Elongation at Break25±3%
HDT101±2℃
Density1.15 g/cm³


Printing Parameters

Nozzle Print Temperature260-280℃
Print Platform Temperature100-110℃
Printing Speed≤150 mm/s
Retraction Distance0.8-1.2mm
Retraction Speed30-40mm/s


Print configuration

Build plate materialRegular
Bed preparationLAC spray
Cooling fanOn
Ambient temperatureRoom temperature
Drying temperature70-80℃

PC-ABS

SUNLU PC-ABS combines the strength of PC with the processing advantages of ABS, offering balanced toughness, heat resistance, and print stability.

PC-ABS.jpg

1. Heat deflection temperature 102 °C, offering good thermal stability

2. High toughness, suitable for printing load-bearing and impact-resistant parts

3. 1.75 ± 0.02 mm diameter tolerance, high printer compatibility

4. Compatible with 99% of FDM printers on the market

1. Combines the heat resistance of PC with the processability of ABS; suitable for automotive trim and consumer electronics (3C).

2. Enclosed printing with a chamber temperature of 90–100 °C is recommended to reduce warping.

3. Dry for 2–3 hours to prevent moisture from affecting coating adhesion.

4. Poor chemical resistance; avoid contact with acids, alkalis, and organic solvents.


Core performance parameters

Tensile Strength38±3 MPa
Bending Strength70±3 MPa
HDT102±2℃
Density1.081 g/cm³


Printing Parameters

Nozzle Print Temperature 260-280℃
Print Platform Temperature 100-110℃
Printing Speed≤230 mm/s
Retraction Distance0.8-1.2mm
Retraction Speed 30-40mm/s


Print configuration

Build plate materialRegular
Bed preparationLAC spray
Cooling fanOff
Ambient temperature90-100℃ (Enclosed chamber)
Drying temperature70-80℃

PEEK

SUNLU PEEK is a premium engineering material with exceptional heat resistance, mechanical strength, and chemical resistance, designed for high-end industrial and extreme application environments.

PEEK.jpg

1. Heat deflection temperature 147 °C, offering excellent thermal stability

2. Excellent chemical resistance

3. V0-level flame retardant

4. Exceptional toughness, prints are impact- and drop-resistant

5. Good self-lubricating properties, suitable for bearings, gears, and similar parts

6. Excellent fatigue resistance, able to withstand repeated cyclic loads without performance loss

1. A high‑end specialty engineering material suitable for applications such as aerospace and medical devices.

2. For long‑term printing, replace with a dedicated high‑temperature resistant nozzle.

3. Dry for 4–6 hours at 110–140 °C with strict temperature control.

4. Enhanced ventilation in the processing area is required to avoid irritation from fumes generated by thermal decomposition.


Core performance parameters

Tensile Strength77 MPa
Bending Strength122 MPa
HDT147℃
Density1.1965 g/cm³


Printing Parameters

Nozzle Print Temperature390-420℃
Print Platform Temperature110-120℃
Printing Speed30-60 mm/s
Retraction Distance1-1.5mm
Retraction Speed30-40mm/s


Print configuration

Build plate materialRegular
Bed preparationLAC spray
Cooling fanOff
Ambient temperature90-100℃ (Enclosed chamber)
Drying temperature70-80℃