Main Material Resin+Photoinitiator Tensile Strength 30-50mpa Viscosity(25°C) 100-300cps Elongation at Break 7-10% Liquid Density 1.11-1.15g/m³ Flexural Modulus 900-1200MPa Solid Density 1.15-1.22g/m³ Bending Strength 40-60MPa Curing Wave Length 405nm Body Shrinkage...
UV tough resin stronger standard resin
Plant-Based Features: 1. Good molding, low odor, low shrinkage;2. Good tensile, bending and toughness properties.3. Environmentally friendly plant base Safe Package:Leak-proof bottle is fully wrapped with a plastic bubble bag...
ABS-like Features: 1. Good molding, low odor, low shrinkage;2. All aspects of tensile, bending and toughness performance is good, can punch and tap.3. The molding performance is similar to ABS,...
Main Material Resin+Photoinitiator Tensile Strength 30-50mpa Viscosity(25°C) 100-300cps Elongation at Break 7-10% Liquid Density 1.11-1.15g/m³ Flexural Modulus 900-1200MPa Solid Density 1.15-1.22g/m³ Bending Strength 40-60MPa Curing Wave Length 405nm Body Shrinkage...
Hand-Washable, Non-Toxic and Reusable, Resin or Model Cleaner, Compatible with 3D Printing Resins, UV Resin, Epoxy Resin ①【SUNLU Hand-washable 3D Printer Resin Detergent 】SUNLU 3D Printer Resin Cleaner is designed...
Main Material Resin+Photoinitiator Tensile Strength 30-50mpa Viscosity(25°C) 100-300cps Elongation at Break 7-10% Liquid Density 1.11-1.15g/m³ Flexural Modulus 900-1200MPa Solid Density 1.15-1.22g/m³ Bending Strength 40-60MPa Curing Wave Length 405nm Body Shrinkage...
PA-like Features: 1. Good molding, low odor, low shrinkage;2. All aspects of tensile, bending and toughness performance is better, can punch and tap.3. The molding performance is similar to THAT...
Main Material Resin+Photoinitiator Tensile Strength 30-50mpa Viscosity(25°C) 100-300cps Elongation at Break 7-10% Liquid Density 1.11-1.15g/m³ Flexural Modulus 900-1200MPa Solid Density 1.15-1.22g/m³ Bending Strength 40-60MPa Curing Wave Length 405nm Body Shrinkage...
Main Material Resin+Photoinitiator Tensile Strength 30-50mpa Viscosity(25°C) 100-300cps Elongation at Break 7-10% Liquid Density 1.11-1.15g/m³ Flexural Modulus 900-1200MPa Solid Density 1.15-1.22g/m³ Bending Strength 40-60MPa Curing Wave Length 405nm Body Shrinkage...
Main Material Resin+Photoinitiator Tensile Strength 30-50mpa Viscosity(25°C) 100-300cps Elongation at Break 7-10% Liquid Density 1.11-1.15g/m³ Flexural Modulus 900-1200MPa Solid Density 1.15-1.22g/m³ Bending Strength 40-60MPa Curing Wave Length 405nm Body Shrinkage...