Products

Material: TPU Flexible Filament  Diameter format: 1.75 mmPrinting temperature: 205-230°CTolerance: ±0.02 mmPrinting speed: 20-40 mm/sPlatform temperature: No needNet weight: 0.5kgGross weight: 0.8kgPackage dimensions: 209 * 209 * 73 mmLength: 165mTensile...

 Main Material  Resin+Photoinitiator Tensile Strength 30-50mpa Viscosity(25°C) 100-300cps Elongation at Break 7-10% Liquid Density 1.11-1.15g/m³ Flexural Modulus 900-1200MPa Solid Density 1.15-1.22g/m³ Bending Strength 40-60MPa Curing Wave Length 405nm Body...

A: Odorless, non-toxic, environmentally friendly, and recyclable, SUNLU PETG is the most suitable 3D filament for families with children, high purity with low shrinkage and superb layer bonding, meeting your demands...

Model ： PLA Diameter Format： 1.75mm Print Temp.： 200-230℃Tolerance： ±0.02mmPrint Speed： 50-100mm/sPlatform Temp： Depends on the platform: No need or 60-80℃N.W.： 1kgG.W.： 1.3kgPacking Size： 209*209*73mmLength： 330mTensile Strength： 6-11kgfMelt Flow Rate：...

Model ： PLA Diameter Format： 1.75mmPrint Temp.： 200-230℃Tolerance： ±0.02mmPrint Speed： 50-100mm/sPlatform Temp： Depends on the platform: No need or 60-80℃N.W.： 1kgG.W.： 1.3kgPacking Size： 209*209*73mmLength： 330mTensile Strength： 6-11kgfMelt Flow Rate： 7-9g/10min(190℃,2.16kg)Colors：...

1. Environmental protection, non-toxic, biodegradable; 2. Soft and warm colors 3. Low shrinkage rate; 4. High strength and rigidity; 5. Very good toughness, not easy to break 6. The printing...

Model : Silk Diameter Format： 1.75mmPrint Temp.： 200-230℃Tolerance： ±0.02mmPrint Speed： 50-100mm/sPlatform Temp： Depends on the platform: No need or 60-80℃N.W.： 1kgG.W.： 1.3kgPacking Size： 209*209*73mmLength： 330mTensile Strength： 6-11kgfMelt Flow Rate： 7-9g/10min(190℃,2.16kg)Colors： 32Certificate：...

Model : Silk Rainbow01Diameter Format： 1.75mmPrint Temp.： 200-230℃Tolerance： ±0.02mmPrint Speed： 50-100mm/sPlatform Temp： Depends on the platform: No need or 60-80℃N.W.： 1kgG.W.： 1.3kgPacking Size： 209*209*73mmLength： 330mTensile Strength： 6-11kgfMelt Flow Rate： 7-9g/10min(190℃,2.16kg)Colors：...

Water Washable Resin Features： 1.【Water Washable, no IPA Needed】Instead of using IPA to clean up the prints, you can use tap water to wash the prints, save your money on IPA. SUNLU...

Product specifications Product size: 265(L) X274(W) X 118(H) mmMaximum capacity: φ210*85（H）mmNet weight: 1190g (Including power adapter)Working environment:A) Environment temperature: 20℃~35℃B) Relative humidity: ≤90%Temperature setting range: 35℃~70℃Power adapter specification:A) Input specification:...

Download S9 plus Marlin File

【Say Goodbye to Poor 3D Printing by Wet Filament】Wet 3d printing filament will caused to stringing, clogging, poor adhesion, and Layer Shift. SUNLU FDM 3D Filament Dryer Enclosure can drying...