Material

  Model : Silk filamentDiameter Format： 1.75mmPrint Temp.： 200-230℃Tolerance： ±0.02mmPrint Speed： 50-100mm/sPlatform Temp： Depends on the platform: No need or 60-80℃N.W.： 1kgG.W.： 1.3kgPacking Size： 209*209*73mmLength： 330mTensile Strength： 6-11kgfMelt Flow Rate：...

1. The printing temperature is 180~200°.  Lower printing temperature means more energy saving and environmental protection, reduce printer loss. 2.  Good fluidity: The printing fluency is better than the existing...

1.【Water Washable, no IPA Needed】Instead of using IPA to clean up the prints, you can use tap water to wash the prints, save your money on IPA. 2.【Fast Curing and...

Model: PLA filament 1.75mmDiameter Format: 1.75mmPrint Temp.: 200-230℃Tolerance: ±0.02mmPrint Speed： 50-100mm/sPlatform Temp： Depends on the platform: No need or 60-80℃N.W.: 0.25kgTensile Strength: 6-11kgfMelt Flow Rate: 7-9g/10min(200℃,2.16kg)Certificate: RoHS, Reach

Diameter：1.75MMTolerance：±0.02MMPrint Temp：200-230℃Print speed：50-100mm.sPlatform Temp：Glue required if not heatedGlue unrequired if heated 60-80 ℃bubble： no bubbleTension（kgf）: 11-16Melt Mass Flow Rate：7-9g/10min(190 ℃,2.16Kg)Breaking elongation：4%N.W.：1 KG.roll,G.W.：1.3KG.roll,Length：1.75mm(1KG)=330M

1. Environmental protection, non-toxic, biodegradable; 2. Soft and warm colors 3. Low shrinkage rate; 4. High strength and rigidity; 5. Very good toughness, not easy to break 6. The printing...

Main Material  Resin+Photoinitiator Tensile Strength 30-50mpa Viscosity(25°C) 100-300cps Elongation at Break 7-10% Liquid Density 1.11-1.15g/m³ Flexural Modulus 900-1200MPa Solid Density 1.15-1.22g/m³ Bending Strength 40-60MPa Curing Wave Length 405nm Body Shrinkage...

Model： PLA Carbon Fiber filamentDiameter Format： 1.75mmPrint Temp.： 200-230℃Tolerance： ±0.02mmPrint Speed： 50-100mm/sPlatform Temp： Depends on the platform: No need or 60-80℃N.W.： 1kgG.W.： 1.3 kgPacking Size： 209*209*73mmLength： 300mTensile Strength： 11-14kgfMelt Flow...

Material: ABSDiameter format: 1.75 mmPrinting temperature: 240-270°CTolerance: ±0.02 mmPrinting speed: 50-100 mm/sPlatform temperature: 80-120 °CNet weight: 1kgGross weight: 1.3kgPackage dimensions: 209 * 209 * 73 mmLength: 395mTensile strength: 6-11kgfThe melt...

Model:  WOODDiameter Format: 1.75mmThere are two WOOD filament recommended print temperature, Please check the package label before start printing:Normal Wood Filament Print Temp：200-220℃Low print Temp Wood Filament: 170-190℃Tolerance： ±0.02mmPrint Speed：...